News

Oil & Gas Asia (OGA) 2026 in Kuala Lumpur, Malaysia, has successfully concluded. As Southeast Asia’s flagship oil and gas exhibition, the event brought together global industry players, EPC contractors and professionals to discuss energy transition and cross‑border cooperation.

Omron Tech Pumps will attend Oil & Gas Asia 2026. Visit Booth 6802, Hall 6 to explore our professional centrifugal pump solutions for oil & gas industry.

Athena Engineering S.R.L., together with its sub-brand Omron Tech Pumps, cordially invites you to the Iraq Oil, Gas & Petrochemicals Exhibition 2026 (IRAQ EXPO OGEP). Visit us at Stand No: B21.

From December 4th to 7th, Athena Engineering Co., Ltd. joined hands with its strategic partner Omron Tech Pumps to make a brilliant appearance at the 2025 Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC). Focusing on core pump equipment and fluid control solutions, the series of high-quality pump products jointly displayed by Athena and Omron Tech Pumps became the highlight of the exhibition, fully demonstrating the two parties’ technical accumulation and market competitiveness in the pump sector.

Omron Tech Pumps, a top innovative fluid transfer solution brand, joins ADIPEC 2025 (Abu Dhabi, Nov 3-6) at Booth 2234, Hall 2. It highlights its high-performance pumps for harsh oil & gas environments, with ATHENA valves showcased alongside to boost operational efficiency.

Last week, Omron Tech Pumps made its appearance at the Oil and Gas Asia (OGA) exhibition held in Malaysia. During the exhibition, its booth attracted a large number of existing and new customers, and finally achieved remarkable results, further consolidating its position in the industry.

Omron Tech Pumps announces its participation in the 21st OGA Asian Oil & Gas Exhibition to be held in Kuala Lumpur from September 2 to 4, 2025, inviting professionals to explore cooperation.

The G‑type single screw pump is an internal‑meshing rotary positive‑displacement pump. Its main working components consist of an eccentric screw rotor and a fixed rubber‑lined stator. As the screw rotates inside the stator, the two mesh to form a series of sealed cavities, which continuously push the medium from the suction end to the discharge end.

As environmental protection requirements keep tightening, projects including water resource recycling, solid‑waste disposal and waste‑gas treatment are growing more reliant on equipment stability. Within the entire fluid‑transport chain, centrifugal pumps stand out as the most widely used pump type in environmental‑protection projects, thanks to their simple structure, stable flow rate and convenient maintenance.

Omron Tech Pumps screw pumps are widely used in chemical industry, sewage treatment, food slurry and other working conditions thanks to their stable conveying performance. However, even premium equipment requires standardized operation and maintenance. Proper maintenance of screw pumps directly determines service life, conveying efficiency and failure rate. Starting from the three core operational links of start‑up, operation and shutdown, this article provides clear maintenance cycles and definite answers to what oil should be filled into Omron Tech Pumps screw pumps, helping users maintain the equipment and reduce unplanned downtime.